DMS 5 Axis CNC Router 12×6 Moving Gantry E819
2020 DMS 5 axis CNC router, U-Frame overhead gantry, 12×6 table, 26.8 hp Hiteco spindle, 20 tool ATC rack, Fagor 8065 MP-Plus, remote. #E819
Machinery Specifications & Features
DMS CNC Router Specifications
- Manufactured in 2020 by Diversified Machine Systems Inc.
- DMS Model no. 5U6-12-6-60S-xxxxx
- 5-Axis U-Frame overhead gantry machine
- Fixed table with fixed-top enclosure
- Manual front doors with safety interlocks
- Solid back wall
- Maximum rapid feed rate: 1600 inches per minute
- 440V / 3-Phase / 60Hz (80 Amps)
Machine Construction
- Rigid fabricated steel base
- Heavy-gauge steel tube and plate weldment
- All structural members stress-relieved for stability
- Precision-ground / machined mounting surfaces
- 6061 T6 aluminum on table and some Z-axis components
Table
- 12′ x 6′ (144″ x 72″) table top
- Machined aluminum
- 3/8″-16 threaded inserts on 12″ centers
- Approx. 19″ height from floor (low-profile frame)
Head & Spindle
- Hiteco Bi-Rotary Tilt V Series 90 spindle
- 26.8 HP (20 kW) liquid-cooled, quick-change
- 500–24,000 RPM (via inverter with electronic braking)
- HSK63A tool holders
- Features through-tool air blast, pneumatic brakes (B & C axes), Heidenhain rotary scales
Air Requirements: 5 CFM @ 100 PSI; ATC Spindle requires minimum of 100 PSI for tool release
Axis Travels & Details
X-Axis (Bridge Travel)
- Travel: ~156 inches
- Max Feed Rate: 1200 IPM
- Bearings: 45 mm roller bearings
- Drive: Spinning recirculating ball nut w/ fixed-end lead screw
Y-Axis (Overhead Gantry)
- Travel: ~84 inches
- Max Feed Rate: 1200 IPM
- Bearings: 45 mm roller bearings
- Drive: dual spinning recirculating ball nuts w/ fixed-end lead screws
Z-Axis
- Travel: 60 inches
- Max Feed Rate: 1000 IPM
- Bearings: 45 mm roller bearings
- Drive: spinning lead screw w/ angular contact bearings
C-Axis (Rotates Parallel to Table)
- Travel: ±320 degrees
- Max Rotational Speed: 12,500 deg/min
B-Axis (Rotates Perpendicular to Table)
- Travel: ±120 degrees
- Max Rotational Speed: 10,000 deg/min
Additional Machine Features
Fagor 8065 CNC System Controller
- 10″ Color LCD screen
- 32 GB memory
- MP-Plus for high-speed machining
- 3D graphics
- Communication software
- DNC via TCP/IP
- Tool center point compensation
- Electrical cabinet is machine-mounted with industrial A/C unit
Installed Equipment & Features
- 20 position automatic tool changer
- Renishaw tool height sensor
- Fagor SERCOS digital drives
- Fagor AC brushless servo motors
- Roller rails
- Safety light tower
- Hand-held programmer (teach pendant)
- Renishaw RMP 600 radio machine probe
- Automatic lubrication system
![DMS 5 Axis CNC Router 5×12 Gantry E740 [SOLD]](https://www.cncpd.com/wp-content/uploads/2023/09/DMS-5-Axis-CNC-Router-E740-a-300x225.jpg)
![DMS 5 Axis CNC Router Dual 2×3 Table E791 [SOLD]](https://www.cncpd.com/wp-content/uploads/2024/06/DMS-5-Axis-CNC-Router-E791-1_Full-shot-300x220.jpg)
