Giordano Colombo RV 90 Spindle Motor w/ Aggregate Saw 3 hp (Used)

$2,773.00

Giordano Colombo spindle motor with aggregate saw head, RV 90 FP1, ATC, fan-cooled, 12,000 RPM, 200 Hz, 2-pole, 3 hp (2.2 kW), 253 V. Used condition.

Only 1 left in stock

  • Visa Card
  • MasterCard
  • American Express
  • PayPal

Description

The Giordano Colombo RV 90 (configuration RV 90 FP1) is a 2-pole, fan-cooled industrial CNC electrospindle integrated with a dedicated right-angle aggregate saw head. Delivering 3 HP (2.2 kW) at 12,000 RPM and 200 Hz, this unit is engineered for continuous-duty horizontal sawing, kerf cutting, and edge-slotting operations in woodworking, composite, and non-ferrous aluminum routing environments.

Manufactured in Italy, the RV series housing is machined from extruded aluminum bar stock and heat-treated special alloy ingots to maintain thermal stability and structural rigidity under radial sawing loads. Inside the spindle cartridge, high-speed precision angular contact bearings—permanently lubricated with specialized high-speed grease—resist axial and radial deflection during plunge and cross-cut cycles.

Because this assembly pairs a 253 V, 200 Hz motor winding directly with a dedicated saw arbor aggregate, it eliminates the tool-change cycle time and Z-axis clearance penalties associated with magazine-loaded aggregate heads.

Technical Specifications

  • Motor Type: Colombo RV 90
  • Tool Change: Manual Tool Change (MTC)
  • Cooling: Fan-cooled
  • Maximum Speed: 12,000 RPM
  • Frequency: 200 Hz
  • Poles: 2
  • Power: 3 hp (2.2 kW)
  • Voltage: 253 V

Collet not included.

Additional information

Manufacturer

Giordano Colombo

Country/Region of Manufacture

Italy

Model Series

Part Number (MPN)

RV90 FP1 4.5HP

Tool Change

Cooling Method

Shaft Fan-Cooled

Speed (RPM)

12,000

Output Frequency (Hz)

200

Poles

2

Horsepower (hp)

3

Kilowatt (kW)

2.2

Voltage (V)

250

Condition

Used

Colombo RV Spindle Motors – Fan Cooled 

Giordano Colombo automatic tool change spindles are designed for applications on machines working wood, plastic, aluminum, light alloy, steel, glass and also marble. The frame is obtained from extruded aluminum bar or from heat treated special alloy aluminum ingot. The bearings are precision angular contact type, with steel or ceramic balls and life lubrication with special grease for high speeds. 

Colombo RV 90 spindle motors

CNC Service Quote Request