Giordano Colombo 824-055-V102 Spindle Motor RV 55/1
Giordano Colombo 824-055-V102 spindle motor, model RV 55/1 FP1 CPE 20 DX, manual tool change, 24,000 RPM, 400 Hz, 2-pole, 1.5 hp (1 kW), 230 V.
Description
The Giordano Colombo 824-055-V102 (RV 55/1) electrospindle is a high-precision, industrial-grade routing solution engineered for high-speed machining centers processing wood, plastics, composites, and light alloy non-ferrous metals. Built around a robust extruded aluminum bar frame or heat-treated special alloy aluminum ingot, this 2-pole motor minimizes thermal distortion and structural resonance during continuous high-load cycles.
Operating at a rated speed of 18,000 RPM (scaling up to a maximum of 24,000 RPM at 400 Hz), the unit integrates precision angular contact bearings with specialized high-speed life lubrication grease. This configuration yields exceptional dynamic stiffness and low Total Indicator Reading (TIR), maintaining G2.5 balancing standards to protect against premature tooling wear and spindle chatter.
Technical Specifications
- Model Series: Colombo RV series, RV55/1
- Model no.: RV 55/1 FP1 CPE 20 DX
- Part no.: 824-055-V102
- Tool Change: Manual Tool Change (MTC)
- Cooling: Compressed Air-cooled
- Speed:
- Rated: 18,000 RPM
- Maximum: 24,000 RPM
- Frequency:
- Rated: 300 Hz
- Maximum: 400 Hz
- Pole Count: 2-pole
- Power: 1.5 hp (1 kW)
- Voltage:Â 230 V
Additional information
| Manufacturer | Giordano Colombo |
|---|---|
| Country/Region of Manufacture | Italy |
| Model Series | |
| Part Number (MPN) | 824-055-V102 |
| Tool Change | |
| Collet size | ER 20 |
| Cooling Method | Shaft Fan-Cooled |
| Speed (RPM) | 18,000-24,000 |
| Rated Speed (RPM) | 18,000 |
| Maximum Speed (RPM) | 24,000 |
| Rated Frequency (Hz) | 300 |
| Maximum Frequency (Hz) | 400 |
| Poles | 2 |
| Kilowatt (kW) | 1 |
| Horsepower (hp) | 1.5 |
| Voltage (V) | 230 |
| Condition | New |
Colombo RV Spindle Motors – Fan Cooled
Giordano Colombo automatic tool change spindles are designed for applications on machines working wood, plastic, aluminum, light alloy, steel, glass and also marble. The frame is obtained from extruded aluminum bar or from heat treated special alloy aluminum ingot. The bearings are precision angular contact type, with steel or ceramic balls and life lubrication with special grease for high speeds.







