8EAA0107 Fagor Battery KIT PILA CNC/VCRT (Rebuilt)
$176.40
Protect your CNC system from critical memory loss. The Fagor 8EAA0107 is a high-reliability 3.5V lithium backup battery board assembly (KIT PILA CNC/VCRT) engineered to preserve system parameters, PAL data, and part programs during power isolation. Order now to ensure operational continuity.
In stock
Description
The Fagor 8EAA0107 backup battery pack is an essential industrial component designed exclusively for Fagor Automation CNC systems. Engineered as a comprehensive 3.5V lithium battery board assembly, this component acts as the primary hardware safeguard against volatile memory corruption.
When power is disconnected or an outage occurs, your controller relies on this specific assembly to maintain crucial system data, including volatile system parameters, custom PAL code, and active machining programs. Without a functional battery module, power loss can lead to immediate system wipe, causing severe production downtime and requiring costly manual reconfiguration of the axis scaling, compensation tables, and machine kinematics.
This drop-in replacement board features a pre-mounted AA lithium cell built on a dedicated PCB layer to handle standard vibration profiles found inside electrical control cabinets. It offers clean, seamless power handoffs when the main supply drops.
New also available: 8EAA0107 Fagor PBAT
Additional information
| Model Compatibility | Fagor 8050, Fagor 8055, Fagor 8040, Fagor 8025 |
|---|---|
| Condition | Rebuilt |
| Manufacturer | Fagor Automation |
| Part Number (MPN) | K-PILA-CNC/VCRT, K PILA CNC/VCRT, 8EAA0107 |
Frequently Asked Questions
No. Standard consumer alkaline batteries provide an incorrect nominal voltage (1.5V vs 3.5V) and lack the necessary discharge profile or terminal board mount for Fagor controllers. Furthermore, alkaline chemistries run a high risk of leaking corrosive fluid inside the CPU rack, causing catastrophic, irreversible hardware damage.
If the battery is removed while the controller is powered down, the internal capacitive buffer will hold the memory for only a brief window. If that buffer discharges before the new assembly is correctly installed, all system parameters, custom macros, and active PLC data will be permanently wiped from the internal SRAM. Always replace with the main system power turned on.
The 8EAA0107 (KIT PILA CNC/VCRT) is a specialized board-level assembly designed primarily for older modular variants like the Fagor 8025, 8050, and 8055 series. Integrated or field-bus optimized variants like the 8035 or 8055i often leverage compact modular battery packs such as the 8C300015. Always match the structural configuration or check the explicit MPN stamped on your existing board before purchasing.
Protect Your CNC Data: Essential Replacement Step
Don’t let a dead battery wipe your system’s critical memory. The Fagor 8EAA0107 battery is vital for retaining parameters and programs. Always back up all data before starting the replacement process.
