GMBM801000-39-0000000 Glentek Servo Motor
$3,142.85
The Glentek GMBM801000-39-0000000 is a high-performance, 1000W permanent magnet brushless servo motor. Featuring high-energy Neodymium-Iron-Boron (NdFeB) magnets and a low-inertia rotor, it delivers rapid acceleration and precise dynamic positioning for demanding industrial CNC machinery.
In stock
Description
The Glentek GMBM801000-39-0000000 is an industrial-grade, permanent magnet synchronous AC brushless servo motor engineered for high-dynamic factory automation and machine tool axes. Operating within the metric 80 mm frame configuration, this motor incorporates high-coercivity Neodymium-Iron-Boron (NdFeB) magnets to achieve an exceptional torque-to-inertia ratio. Its low-inertia rotor construction allows for aggressive acceleration and deceleration duty cycles without saturation or excessive thermal overhead.
Designed to eliminate high-frequency cogging torque, the internal permanent magnets utilize a precision-skewed orientation. This geometric design ensures ultra-smooth velocity profiles and total torque uniformity down to near-zero RPM, satisfying the stringent surface-finish requirements of high-tolerance CNC milling and turning centers. The motor is native to closed-loop motion networks, frequently paired with the Glentek 9615 servo drive or equivalent high-bandwidth digital amplifiers.
Technical Specifications
- Series: Glentek GMBM80
- Model no.: GMBM801000-39-0000000
- Frame Size: 80 mm motor
- Rated Power: 1000 Watts @ 3,000 RPM
- Back EMF Constant: 39 V/Krpm @ 1,000 Watts
- Brake Option: No brake installed
- Flange Type: Standard
- Shaft Type: Standard
- Lead Termination Type: 2 AMP
- Wiring Diagram: Glentek standard
- Feedback: 2,048 PPR (Pulses Per Revolution) incremental encoder
- Sealing Option: No shaft seal (IP54 Sealing)
- Speed:
- Maximum Speed: 5,000 RPM
- Rated Speed: 3,000 RPM
- Torque:
- Continuous Stall Torque: 29.4 Lb-in. / 3.3 Nm / 5.4 A
- Peak Stall Torque: 88.2 Lb-in. / 9.9 Nm / 16.2 A
Additional information
| Model Series | |
|---|---|
| Condition | New |
| Part Number (MPN) | GMBM801000-39-0000 |
| Manufacturer | Glentek |
Frequently Asked Questions
No, the GMBM801000-39-0000000 model suffix configures it with no brake installed. Adding a brake extends the physical length of the housing, modifies the feedback alignment profile, and requires a dedicated 24VDC logic integration. Verify your mechanical clearance and model schematic before substituting a non-brake unit for a braked unit.
This motor is natively engineered to pair with the Glentek 9615 AC servo amplifier series. It accepts sinusoidal commutation via standard feedback tracks. If integrating into a third-party servo drive, ensure the drive can process a 2,048 PPR incremental quadrature encoder signal and is matched to handle a 5.4A continuous / 16.2A peak current profile.
If internal fluid contamination occurs, the motor will typically trigger encoder tracking faults on the drive. Do not attempt to clean the optical disk with harsh industrial solvents. The assembly must be extracted, thoroughly dried, and resealed. For high-fluid environments where heavy spray is persistent, upgrade from the standard IP54 sealing to the optional IP65 configuration to prevent recurring contamination.
You may also like…
Upgrade Your CNC Machine With Yaskawa Sigma 7
Is your CNC machine experiencing issues with a Glentek 9615 drive or a GMBM motor? You might qualify for a servo system upgrade. These older Glentek models are discontinued. Replacing them can lead to lengthy lead times.
Our CNC technicians offer Yaskawa Sigma 7 servo system upgrade solutions to keep you productive. If you have a Glentek 9615 / GMBM servo package and are considering an upgrade, contact our engineers today for more information.
