8C700402 Fagor BAT CN65/70-RS (R)
$147.148C700402 Fagor 8065/8070 CNC system controller replacement battery pack BAT CN65/70-RS (R).
-
-
8C800007 Fagor CNC Monitor Mounting Bracket
8C800007 Fagor bracket for mounting an 11″ LCD monitor into a 14″ CRT 8050 front panel.
-
8CHA1000 Fagor 8025-M Monitor Front Panel
8CHA1000 Fagor Front Panel Keypad, FP 25M MET, includes keypad, feed rate override switch, and circuit board. Compatible with Fagor CNC 8025 MGP/P MILL.
-
8CHA1001 Fagor 8025-T Monitor Front Panel
8CHA1001 Fagor 8025 front panel, FP 25T MET, includes keypad, feed rate override switch, and circuit board. Compatible with Fagor 8025-T Lathe controllers.
-
8D000064 Fagor Sercos Interface Module
8D000064 Fagor Sercos communication driver/interface module, FSR (RF) sercos driver, compatible with Fagor AXD servo drives.
-
8D600002 Fagor FXM Servo Motor Power Connector MC-23
$147.498D600002 Fagor FXM servo motor main power connector, MC-23. This male, motor-side component is capable of 23 Amps.
-
8EAA0107 Fagor Battery KIT PILA CNC/VCRT
$202.148EAA0107 Fagor 3.5V lithium battery assembly, model K-PILA-CNC/VCRT or K PILA CNC/VCRT, for Fagor 8025, 8040, 8050, 8055 CNC system controllers.
-
8EAA0107 Fagor Battery KIT PILA CNC/VCRT (Rebuilt)
$176.40Protect your CNC system from critical memory loss. The Fagor 8EAA0107 is a high-reliability 3.5V lithium backup battery board assembly (KIT PILA CNC/VCRT) engineered to preserve system parameters, PAL data, and part programs during power isolation. Order now to ensure operational continuity.
-
8EAA0116 Fagor 101/102 Front Panel
8EAA0116 Fagor Automation 101/102 CNC system front panel. (Keypad only, with no CRT boards.)
-
8I003006 Fagor 100P Portable Handwheel
8I003006 Fagor Automation CNC system 5V portable MPG handwheel remote 100P, with axis selector button, 10 ft. shielded cable, 7-pin connector.
-
AXD 1.08-S0-0-B Fagor Modular Axis Drive (Used)
$3,649.24AXD 1.08-S0-0-B Fagor digital modular axis drive, with a peak current of 8 Amps. Used condition.
-
AXD 1.15-S0-0 Fagor Servo Drive Cable 8m
Fagor 8m cable for Fagor Digital Module Axis Drive with Analog Input.
-
Fagor 8050 / 8055 14in CRT to 11in LCD Monitor Adapter (Used)
$2,852.04Fagor 8050/55 CNC system monitor adapter assembly w. Fagor 14” CRT to 11” LCD monitor adapter kit and keypad. Pre-assembled. Used condition.
-
Fagor 8050 10 Inch VGA CRT Monitor (Used)
$343.00MON 50M-10C-COL Fagor 8050 CNC 10 inch VGA CRT monitor, without front operator panel. Used condition.
-
Fagor 8050 10.4 Inch LCD Monitor Adapter Plate
Fagor 8050 10.4″ LCD monitor adapter plate, for Fagor Automation 8050 CNC system 14″ CRT monitor.
End of content
End of content
