GM4050-38-02402510-279A Glentek Servo Motor
$2,408.39
GM4050-38-02402510-279A Glentek permanent magnet brush DC servo motor with 16-pin male MS connector, 1,000 count encoder, and square flange.
Only 2 left in stock
Description
GM4050-38-02402510-279A Glentek permanent magnet DC brush servo motor.
GM4050-38-02402510-279A Motor Specifications:
- Power @ Max Speed: 2.29 hp / 1.708 kW
- Continuous Stall: 41.3 Lb-in / 4.67 Nm / 12.9 Amps
- Peak Stall: 206.5 Lb-in / 23.35 Nm / 64.5 Amps
- Frame Size: 4.0 inch motor
- Stack Length: 5.0 Inch stack
- Back EMF Constant: 38 V/Krpm
- Brake Option: no brake installed
- Tachometer Option: 7 VDC tachometer
- Encoder option: 1,000 PPR (Pulses Per Revolution) encoder
- Brushless Resolver Option: No resolver installed
- Flange Type: M1 / square
- Lead Termination: 16-Pin, Male MS connector
- Wiring Diagram: Special
- Sealing Option: No shaft seal
- Maximum Speed: 3,500 RPM
Note: GM4050-38-02402510-279A is a direct replacement for the discontinued Baldor MTE 4090-BLBCE servo motor. Ask our sales team today for more information about cross referencing replacement servo motors.
Additional information
| Condition | New |
|---|---|
| Manufacturer Part Number | GM4050-38-02402510-279A |
| Manufacturer | Glentek |
Glentek GM Series DC Brush Servo Motors
GM series DC brush servo motors utilize traditional ferrite magnets, which are ideal for cost sensitive applications. In addition, the higher inertia armatures provide improved motor to load inertia matching for medium to high inertia loads. This helps to reduce the mechanical shaft resonance, which allows higher servo gains with increased stability. All frame sizes incorporate skewed armatures, which provide ultra smooth operation (i.e. low cogging torque) at all speeds.
