GM4040-41-02002511-131 Glentek DC Servo Motor (Used)
$600.00
GM4040-41-02002511-131 Glentek permanent magnet DC brush servo motor features MS connector, 2,000 count encoder, and A1-B flange (3.5″ hole-hole). Used condition.
Only 1 left in stock
Description
GM4040-41-02002511-131 Glentek high-performance permanent magnet DC brush servo motor. Used condition.
Technical Specifications
- Series: Glentek GM4000
- Model no.: GM4040-41-02002511-131
- Frame size: 4 in. motor
- Stack length: 4 in. stack
- Back EMF Constant: 41 V/Krpm
- Brake: no brake installed
- Tachometer option: 7 VDC tachometer
- Encoder Option: no encoder
- Brushless Resolver Option: no resolver installed
- Voltage: 180 VDC
- Maximum Speed: 3,500 RPM
- Power Output: 1.74 HP (1.30 kW)
- Feedback: 2,000 count encoder
- Lead Termination: 16-Pin, Male MS connector
- Mounting: A1-B flange (3.5″ hole to hole)
- Cont. Stall Rating: 31.3 Lb-in / 3.54 Nm / 9.1 Amps
- Peak Stall Rating: 156.5 Lb-in / 17.70 Nm / 45.5 Amps
Additional information
| Condition | Used |
|---|---|
| Manufacturer | Glentek |
| Part Number (MPN) | GM4040-41-02002511-131 |
| Model Series |
Glentek GM Series DC Brush Servo Motors
GM series DC brush servo motors utilize traditional ferrite magnets, which are ideal for cost sensitive applications. In addition, the higher inertia armatures provide improved motor to load inertia matching for medium to high inertia loads. This helps to reduce the mechanical shaft resonance, which allows higher servo gains with increased stability. All frame sizes incorporate skewed armatures, which provide ultra smooth operation (i.e. low cogging torque) at all speeds.
